How to install tire cover
Tire covers (also known as wheel hub caps or wheel hub decorative caps) are common accessories in car exterior modifications, which can not only protect the wheel hub but also enhance the visual effect. The following is a compilation of hot topics and hot content about tire cap installation in the past 10 days across the Internet, combined with structured data to provide you with a detailed guide.
1. Preparation work before tire cover installation
| steps | Operation content | Things to note |
|---|---|---|
| 1. Confirm model matching | Measure wheel diameter (commonly 15-22 inches) | Refer to the vehicle manual or tire sidewall markings |
| 2. Clean the wheel hub | Use a neutral detergent to wipe the surface of the wheel hub | Avoid using corrosive chemicals |
| 3. Check accessories | Confirm that the buckle/screw accessories are complete | Products purchased online need to check the delivery list |
2. Comparison of mainstream tire cover installation methods
| Type | Installation method | Applicable models | Robustness |
|---|---|---|---|
| snap-on | Align the edge of the wheel hub and press and fasten | Economy car | ★★★☆☆ |
| screw fixed | Use special tools to tighten the screws | SUV/off-road vehicle | ★★★★★ |
| Magnetic suction | Built-in magnet adsorption | New energy models | ★★☆☆☆ |
3. Detailed installation steps (taking snap-on type as an example)
1.Alignment: Align the center mark of the tire cover with the center of the wheel hub to ensure that the edge of the cover body fully fits the wheel hub.
2.preliminary fixation: Use the palm of your hand to press the edge of the tire cover evenly and firmly. A "click" sound indicates that the buckle is initially fixed.
3.Comprehensive inspection: Go around the tire and check whether all the buckling points are fully engaged and there is no looseness or warping.
4.Test firmness: Gently pull the edge of the tire cover to test the fixing strength. It is recommended to test drive at low speed for 1-2 kilometers to review after installation.
4. Answers to recent hot questions
| question | solution | Related data |
|---|---|---|
| Abnormal noise while driving | Check whether the buckle is broken. It is recommended to replace the metal buckle. | The breakage rate of plastic buckles is about 12% |
| Falling off after washing the car | Choose the upgraded model with waterproof strips | Waterproof models are 15-20% more expensive |
| Difficult to install in winter | Use a heat gun to heat to 40°C to soften the plastic | Plastic hardness increases by 30% at low temperatures |
5. Maintenance suggestions after installation
1.Regular inspection: It is recommended to check the fixation status every 5000 kilometers or after washing the car 5 times.
2.Cleaning method: Use a soft-bristled brush to clean the gaps, and keep a distance of more than 30cm with the high-pressure water gun.
3.Replacement cycle: Ordinary plastic models are recommended to be replaced every 2 years, while metal models can be used for 3-5 years.
4.Note on modification: Before modification, it is necessary to confirm that it will not affect the heat dissipation of the wheel hub (the temperature increase of the brake disc after modification should be <15℃).
6. Hot purchasing trends (data in the past 10 days)
| Material type | Search popularity | average price | Mainstream brands |
|---|---|---|---|
| ABS plastic | 58% | 80-150 yuan | Card Decoration Club, Mrs. Che |
| Aluminum alloy | 32% | 200-400 yuan | BBS,OZ |
| carbon fiber | 10% | 500-1200 yuan | Vorsteiner, MANSORY |
With the above structured guide, you can easily complete the installation and maintenance of tire covers. It is recommended to choose genuine accessories with anti-counterfeiting marks to avoid purchasing three-no products that may affect driving safety. If professional installation is required, the 4S shop charges usually 50-100 yuan per round (including accessory testing).
check the details
check the details
en
